Panel Door

HDF Panel Doors are manufactured from preservative treated well seasoned wood. Our door shutters are most durable and highly dimensionally stable. Our products are suitable for interior purpose but can be used as exterior purpose also by applying water proof paints at face and back of both sides of door shutters.

DETAILS

  • Raised Panel Designs: – We use three designs to manufacture the doors Shutters :-
    Two Panel
    Four Panel
    Six Panel
  • Type of Door Shutters: – We manufacture two types of door shutters :-
    Heavy Duty :- having void area less than 35%
    Light Duty :- having void area less than 65%
  • Sizes :– Moulded Raised HDF Panel Door are available in modular as well as non-modular sizes having the thickness of the shutters 30mm, 35mm.
  • Material :-
    Timber: – We use seasoned timber of minimum bulk density of 450 to 500 kg/m3 at 12% moisture content for rails, stiles and core filling of door shutters.
    Raised fiberboard Skin: – Minimum 3mm thickness of HDF face skin is used to manufacture the door shutter.
    Adhesive: – Phenol formaldehyde synthetic resign confirming to BWP Grade of IS-848 is used.
  • Preservative Treatment :– Before seasoning timber is treated by preservative compounds like ACC. we check the presence of preservative as per IS : 401 after seasoning.
  • Construction :- Stiles and rails 45mm to 75mm is provided in complete door Shutters after sizing. Rails and stiles are joined and filled with maximum 30mm width seasoned strips having up to 12% moisture content. Door shutters heavy duty and light duty are having same construction only the difference is in void area as per IS: 15380: 2003.
  • Hot Pressing :– In hot pressing glued skin is assembled at the both side of sub assembly of rail, stile and filler sheets of polyurethane sheet are pressed at the both side of raised HDF Skins. It improves the visual finish of wood grains on panel. Assembled structures are hot pressed at suitable temperature and pressure.
  • Sizing and finishing: – Pressed Sheets of door shutters are sized in length and width. After sizing the door are finished and primed with white primers. Now whole lot is stacked and sampling is done for conformity of lot. After passing the laboratory test whole lots are dispatched according to the orders.

Technical Specification of Molded Skin of DOORPAN (Romania)

  • Density = 1010 kg/m3
  • Moisture Content = Average 4% to 7%
  • Water Absorption = Maximum 30%
  • Thickness Swell = Maximum 30%
  • Tensile Strength = 1.24 N/mm2
  • Modulus of Rapture = 33.5 N/mm2
  • Immersion in Water = 30% swelling may occur but no Disintegration
  • Formaldehyde Emissions = 7 mg/100g

About Us

We give top most importance to maintaining high standards of quality and excellence. We have formulated stringent quality control mechanism that begins from the very first stage of production.

Our Address

  • Near plot no-d8, Riico Industrial Area Kaladera(teh. Chomu), Distt Jaipur, 303801.

  •   +91-9660588999 , +91-9868250801

  •   keshavplyjpr@gmail.com

Reach us

Social Media

Copyrights © 2017. All Rights Reserved By- Keshav Plywood Industries Pvt Ltd.

Website Designed & Promoted By-keywordindia.com